HS-050-LV Mauch Current Sensor Board 50A 2-6S Lipo (28V Max)

AUD33.00
SKU:
HS-050-LV
Shipping:
Calculated at Checkout
HS-050-LV Mauch Current Sensor Board 50A 2-6S Lipo (28V Max)

PRODUCT DESCRIPTION

The Mauch 50A Current Sensor board is a current measurement sensor board, based on Allegro Hall Sensor ACS-50U. 

The voltage reading of the LiPo is optimised for between 2S to 6S LiPo packs or 7.4V to 28V. 

This Sensor board needs a power supply. So please select the matching BEC according your preference from the BEC section. 

The BEC will also power the flight controller as well as the attached equipment like GPS, telemetry... etc. 

Connected to the sensor are 2x10cm  AWG12 wire (red) as a standard. 

The board comes with 10cm connection cable (DF-13-6p <-> DF-13-6p) to the FC. If you need a customized cable in different length, then please order it separately.