HS-050-HV Mauch Current Sensor Board 50A 4-14S Lipo (60V Max)

AUD33.00
SKU:
M011
Shipping:
Calculated at Checkout
HS-050-HV Mauch Current Sensor Board 50A 4-14S Lipo (60V Max)

PRODUCT DESCRIPTION

The Mauch 50A Current Sensor board is a current measurement sensor board, based on Allegro Hall Sensor ACS-50U. 

The voltage reading of the LiPo is optimised for between 4S to 14S LiPo packs or 14.8V to 60V. 

This Sensor board needs a power supply. So please select the matching BEC according your preference from the BEC section. 

The BEC will also power the flight controller as well as the attached equipment like GPS, telemetry... etc. 

Connected to the sensor are 2x10cm  AWG12 wire (red) as a standard. 

The board comes with 10cm connection cable (DF-13-6p <-> DF-13-6p) to the FC. If you need a customized cable in different length, then please order it separately.