• Due to the effect of COVID-19 XM2 STORE's showroom is closed.
  • All orders will be shipped directly to customers.
  • Due to the effect of COVID-19 XM2 STORE's showroom is closed.
  • All orders will be shipped directly to customers.

iFlight Nazgul5 HD w/ Caddx Vista Digital HD System - 6S version
iFlight Nazgul5 HD w/ Caddx Vista Digital HD System - 6S version
iFlight Nazgul5 HD w/ Caddx Vista Digital HD System - 6S version
iFlight Nazgul5 HD w/ Caddx Vista Digital HD System - 6S version
iFlight Nazgul5 HD w/ Caddx Vista Digital HD System - 6S version
iFlight Nazgul5 HD w/ Caddx Vista Digital HD System - 6S version
iFlight Nazgul5 HD w/ Caddx Vista Digital HD System - 6S version
iFlight Nazgul5 HD w/ Caddx Vista Digital HD System - 6S version
iFlight Nazgul5 HD w/ Caddx Vista Digital HD System - 6S version
iFlight Nazgul5 HD w/ Caddx Vista Digital HD System - 6S version

iFlight Nazgul5 HD w/ Caddx Vista Digital HD System - 6S version

IFLIGHT RC

Regular price $489.00 $463.00 5% OFF

This special price ends in : This price of this item will revert back to $489.00 at the end of this countdown

Low Stock : 0 Left

Ask about this product

This special price ends in :

people are currently looking at this product

Estimated delivery time 3-5 days

PRODUCT DESCRIPTION

Nazgul5 HD is a 5" size BNF (Bind-and-Fly) quadcopter with Caddx Vista Digital HD System on it. We stuck the lighter Caddx Vista on one of our new updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING-E motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don't worry, get some spares with your order and easy-swap out in the field. Wanna strap your GoPro on that beast as well? Check out our collection of high-quality TPU prints for your cam!


HIGHLIGHTS:

- 5mm arm design for more durability

- Easy-Swap arms

- LED illuminated Logo

- XING-E 2207 motors and NAZGUL 5140 props
- 5" version also fits 5.1" style propellers
- Popular True-X configuration
- TPU crash-guards
- Fits both 30.5x and 20x stacks


XL5 V5 frame specs:

  • SucceX-E F4 45A flight stack
  • XING-E 2207 FPV Motor (6S 1800kv )
  • Wheelbase:   240mm*240mm
  • Body size: 170*170mm
  • Propeller size: 5 inch /5.1 inch
  • FC pattern: 30.5*30.5/20*20 mm
  • FPV cam spacing: 19mm
  • Weight: 400.8g (without battery)


FACTORY SETUP and WIRING DIAGRAM:


This BNF comes pre-built and set up with all necessary parameters to bind-and-fly. We also added a basic filter and PID tuning as well as some more software tweaks enhance the flight experience.


Reflashed your drone but didn't back up the setup? Messed up the whole tune and want our factory tune back?
No need to worry! All Factory Dumps and Wiring Diagrams can be found on our Google Drive: LINK


Nazgul5 HD Quad BNF Included Components and Parts

  • Prebuilt and tested Quadcopter
  • 1x XL5 V5 Frame
  • 1x Caddx Vista Digital HD System Kit
  • 1x Albatross LHCP RP-SMA 5.8g antenna
  • 2sets x Nazgul 5 inch 3-blades (Set of 4 - Color may vary)
  • 1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
  • 1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)


FC // SucceX-E F4 Flight controller

- MCU:STM32F405

- Gyro:MPU6000

- Betaflight OSD:YES

- Blackbox:8MB

- 4X Uarts(1 2 3 6 )

- 8 x Dshot/Proshot/Oneshot output

- 8 x individual ESC power/ signal pads

- 1 x Group of Gnd/Vbat/M1/M2/M3/M4/Cur/TX

- VTX telemetry: YES

- WS2812 led Strip:YES

- Baro:No

- Beeper:YES

- Input:2-6S(Max 8S)

- BEC:5V/2.5A cont

- Firmware target: BETAFLIGHTF4

- Mounting:30.5*30.5mm,φ4mm with Grommets φ3mm

- Dimensions:36*36mm

- Weight:7.6g


ESC // SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC

- Dimension: 40*43mm

- Mounting Holes: 30.5*30.5mm/Φ3mm

- Weight: 14.4g

- Supports 2-6S Lipo input

- STM32F051 MCU, 48Mhz Runs BLHELI 16.X Firmware

- Current sensor: YES

- BEC: NO

- Supports: DShot150/300/600/1200/MultiShot/OneShot etc.

- Target: G-H-30 BLS 16.7


Additional Suggested Parts

  • DJI HD FPV Goggles
  • Radio Controller
  • Battery 4S 1550mAh
  • Battery 6S 1300mAh
  • GoPro Mounts

Important

The DJI Remote Controller is recommended for beginners since you won't need to set up another receiver, but it is also optional in this BNF drone because it is NOT required in order to use the FPV system. If you don't choose to use the DJI Remote Controller, you can choose a receiver option for your transmitter. and then bind to your own radio as usual.